Management review that actually improves the business
Learn how to run an ISO 9001 Clause 9.3 management review that turns evidence into decisions, with the right inputs, actionable outputs, and a cadence that fits your risks.
STANAG 7085
Makers and integrators of ISR sensor data links and the ground segments that receive them, and the programmes that specify interoperable ISR data links.
STANAG 7085 is the NATO agreement on interoperable data links for ISR systems, edition 4. NATO has not released it publicly; this page describes it from public NATO publications that cite it.
NATO has not released this STANAG publicly. It is NATO UNCLASSIFIED, and organisations that need it obtain it through their national standardization authority.
STANAG 7085 is the NATO Standardization Agreement on interoperable data links for ISR systems, covering the publication AEDP-7085. Edition 4 was promulgated in April 2018 under CNAD, AC/224 NAFAG, JCGISR. NATO has not released STANAG 7085 publicly, so this page describes it from public NATO publications that cite it: AEDP-02, AEDP-06 and AEP-84.
AEDP-02 describes STANAG 7085 as removing "the limits to interoperability that arise through the use of dedicated, proprietary data links to support ISR sensor systems" by describing a limited number of interoperable data link profiles, each one a unique combination of waveform parameters aside from a small set of variable mission parameters. It says the current profiles are based on either the U.S. Standard Common Data Link (STD-CDL) or the ETSI DVB-DSNG Based Data Link (DSDL) systems, and states that "STANAG 7085 profiles provide data rates from 200 Kb/s and 274.176 Mb/s to support a wide range of ISR missions" and that "All current profiles are capable of conveying Internet Protocol (IP) packetized payloads." According to AEDP-02, AEDP-10 contains "implementation guidance for STANAG 7085 as well as security classification guidance, and test and certification guidance."
AEDP-06 recounts that NATO's ISR architecture defined the interface between the ISR acquisition and ground elements as one requiring standardisation, and describes it this way: "The interface consists of the imagery format (STANAG 7023 or STANAG 4545) and either a wideband data link (STANAG 7085) and/or wideband digital tape recorder (STANAG 7024)." AEP-84 counts STANAG 7085 among the existing or emerging STANAGs applicable to UASs, which provide standards for "interoperable data link (STANAG 7085)", and its reference list gives the title as Interoperable Data Links for Imaging Systems.
A supplier bound by STANAG 7085 through a contract holds the obtained text through its national authority. In ComplyTrain you record the requirements that apply to you as your own requirements, give each an owner, and keep the evidence that shows you meet them against each one.
Tell us how you need to work with STANAG 7085 and what you need from it. We will come back to you about what ComplyTrain can do.
Thank you. Your list is on its way to your inbox, and we will come back to you on what working with these standards in ComplyTrain involves, usually within one business day.
One system for the whole compliance programme. Start with the module you need most.
Collect information the same way every time, and decide in advance what happens next.
Know whether your controls are operating, not just whether a policy says they exist.
Turn the compliance work you already know about into a plan with owners, dependencies and dates.
Know what you can offer, and hold the evidence behind every configuration you offer it in.
Eight built-in reports across every module, scheduled, delivered, and filed where the evidence lives.
The sector news that matters to your organisation - read and rated by AI, and delivered as a scheduled digest in your own language.
AI reads the tender pack and pulls out the requirements, deadlines and rules - then helps you draft the response from your own approved content, with you reviewing every step.
One current register of the suppliers and partners you depend on - each risk-assessed, re-assessing itself on schedule, and wired straight into your risk register.
See every requirement you face - across every standard, plus your own contracts and policies - traced to the documents, evidence and processes that satisfy it.
Identify, score, treat and review your risks in one place - with AI to help anyone run a proper assessment, and a defensible trail behind every decision.
Assign training, prove it was understood, and hold the competence records an auditor asks for.
Draft compliance documents with AI, keep every version under control, and export them beautifully branded - all in one place.
Audits, corrective actions, processes and approvals in one quality system, organised around ISO 9001.
Learn how to run an ISO 9001 Clause 9.3 management review that turns evidence into decisions, with the right inputs, actionable outputs, and a cadence that fits your risks.
The types of ISO 9001 audit, what Stage 1 and Stage 2 each check, how nonconformities are graded and closed, and how to prepare for your first certification.
The EDF consortium rule is usually quoted as three entities from three Member States. It has a second limb about control that the word independent quietly hides, and two exceptions that disapply it entirely.